Connectivity Where There Isn't Any
A self-contained, solar-powered Starlink system for remote parks, trails, and conservation lands. 200Ah LiFePO4 battery, 200W solar array, VictronTM charge controller, and Starlink — included in every system. No power grid. No cell signal. No ground disturbance, no permits. Power live trail cameras, wildlife monitoring, environmental sensors, public kiosks, and 24/7 live streams anywhere in the lower 48.
Why Sentinel is Different
Engineered for the most remote locations on Earth
Complete Off-Grid Capability
200Ah LiFePO4 battery and 200W solar array included in every system. Expandable to 600W. No power grid required—fully self-sufficient in the most remote locations.
No Ground Disturbance, No Permits
Pole, wall, tripod, or rolling-cart mount—every option avoids excavation and ground penetration, so there's no NEPA ground-disturbance trigger on federal or state park land. Deploy in days, not permitting cycles.
It Knows What It Hears
Optional on-device AI listens around the clock and identifies the birds and frogs at your site automatically, then publishes them to a live public page—a living record of the wildlife on your land. See it live →
200Ah LiFePO4 Battery Built-In
Each unit contains a powerful 200Ah LiFePO4 battery for approximately 7 days of continuous operation without solar. With the included 200W solar array, you get unlimited runtime.
PTZ Camera with Climate Control
Professional pan-tilt-zoom camera with built-in heating and cooling. Operates in extreme temperatures from -40°F to 140°F. Full camera controls, motion detection, and 24/7 YouTube streaming.
Turnkey Installation
Professional on-site installation available anywhere in the lower 48 states. We handle everything from Starlink deployment to camera mounting, power setup, and sensor integration.
How Sentinel Works
Professional setup, zero hassle
Choose Your Configuration
Choose Sentinel ($6,200) for off-grid connectivity, or Sentinel + Camera ($7,500) for 24/7 live monitoring. Add mesh Wi-Fi nodes or environmental sensors to either package.
Professional Installation
DIY or professional installation available (starting at $2,500 in lower 48). We handle Starlink deployment, camera mounting, power setup, and sensor integration.
Go Live
Log in to your dashboard for live streaming, clip management, camera controls, and sensor data. Stream to YouTube or keep it private.
Don't take our word for it. Watch one work.
This is a Sentinel we deployed in the field. Its optional on-device AI listens around the clock and identifies the birds and frogs around it—for free, on the device—and publishes every call to a live public page with photos, playable recordings, weather, and a searchable archive.
- Free on-device AI — no per-detection cloud cost
- A living, shareable public record for your land
- Running off-grid on solar and Starlink right now
Built for Land Managers & Conservationists
From national parks to research stations—if it's remote, we can connect it
National & Regional Parks
Bring connectivity to trailheads, visitor centers, scenic overlooks, and backcountry areas. Stream to YouTube for public engagement or keep private for park management.
- • Trail condition monitoring
- • Visitor safety & traffic flow
- • Scenic overlook live streams
- • Wildlife activity tracking
- • Trailhead Wi-Fi & kiosks
Conservation & Research
Study bird migration, monitor nesting sites, track species, and document wildlife behavior without human presence disrupting natural patterns.
- • AI wildlife ID by sound
- • Nesting site documentation
- • Wildlife corridor monitoring
- • Endangered species protection
- • Environmental sensor integration
Water Access & Monitoring
Monitor boat launches, fishing access points, beaches, and waterways. Track water levels, detect flooding, and support visitor safety at remote aquatic sites.
- • Boat ramp monitoring
- • Beach/shoreline live views
- • Water level tracking
- • Flood detection & alerts
- • Fishing access documentation
Ranch & Farm Monitoring
Livestock tracking, crop monitoring, fence lines, water tanks, remote pastures
Fire Watch & Prevention
Remote fire towers, smoke detection, forestry monitoring, wildfire early warning
Campgrounds & Visitor Areas
Guest Wi-Fi, payment kiosks, check-in stations, spread-out site coverage with mesh
Trail Systems
Hiking trails, bike paths, backcountry routes, condition monitoring, usage tracking
Research Stations
Climate monitoring, geological studies, environmental data collection, sensor networks
Infrastructure
Pipelines, bridges, dams, utility monitoring, remote asset inspection
Temporary Events
Festivals, races, outdoor events, quick-deploy tripod mounting, temporary coverage
Disaster & Field Ops
Rapid-deploy connectivity for recovery sites, field command, and temporary operations
200Ah LiFePO4 battery + 200W solar array + Victron controller — engineered with Starlink™ for complete off-grid operation
Field-deployed & streaming today
See a live unit →
Built for federal & state lands
No ground disturbance · no NEPA dig permits
Built, installed & supported by Terrain360
Richmond, Virginia · lower-48 install
Professional Pricing
Enterprise-grade equipment engineered for the most demanding applications
Sentinel
Complete off-grid Starlink connectivity system, ready to deploy anywhere.
- Starlink Satellite Terminal + Router
- 200Ah LiFePO4 Battery System
- 200W Solar Panel Array (expandable to 600W)
- Victron Solar Charge Controller
- Weather-resistant enclosure (-40°F to 140°F)
- Pole mount hardware
- Cabling, connectors & surge protection
- ~7 days runtime without solar
Sentinel + Camera
Everything in Sentinel, plus 24/7 PTZ camera for live monitoring, wildlife observation, security, and visitor engagement.
- Everything in Sentinel
- PTZ Camera with Heating/Cooling
- Motion detection & alert system
- 30-day cloud video retention
- Camera control interface & clip management
Extend Wi-Fi coverage to campgrounds, multi-building sites, or spread-out visitor centers. Each node is fully self-powered.
- Outdoor-rated Wi-Fi 6 access point
- Solar panel + battery (fully self-powered)
- Weatherproof enclosure
- Installed during initial site setup
- Chain multiple nodes for large areas
Add remote environmental monitoring to either package.
- Weather station (temp, humidity, wind, pressure)
- Water level / stream gauge monitoring
- Air quality sensors (PM2.5, PM10, ozone)
- Soil moisture monitoring
- Custom sensor integration (serial/digital)
- Automated data transmission to your server
Wi-Fi Coverage
The Sentinel’s Gen 3 Starlink router uses Wi-Fi 6 and covers approximately 2,500–3,200 sq ft — roughly 150–300 feet line-of-sight in an outdoor environment. That’s typically more than enough for a trailhead, kiosk, or visitor area. For larger sites, add mesh nodes to extend coverage further.
Important: The Starlink dish requires a clear view of the sky for a reliable connection — no heavy tree canopy directly overhead. We evaluate sky visibility at every site during the survey and position the unit for optimal signal.
Deployed in the Field
Real Sentinel system — pole-mounted waterfront deployment
Per-Site Cost Summary
| Configuration | Hardware + Install | Monthly |
|---|---|---|
| Sentinel Connectivity Only | $8,700 | $390/mo |
| Sentinel + Camera Connectivity + 24/7 Camera | $10,000 | $390/mo |
| Sentinel + Camera + Sensors Full Package | $10,000 + sensors | $390/mo |
Multi-Site & Volume Pricing
| Quantity | Sentinel | Sentinel + Camera |
|---|---|---|
| 1–4 units | $6,200 | $7,500 |
| 5–10 units (3% off) | $6,014 | $7,275 |
| 11+ units (5% off) | $5,890 | $7,125 |
Volume discount applies to hardware. Installation and monthly service rates remain the same.
Multi-Agency Deployments & Custom Solutions
For national parks, state agencies, conservation organizations, and land management operations deploying multiple systems or requiring custom configurations.
- Centralized management dashboard for all units
- Annual prepay discount on monthly service
- Extended video retention (90+ days) available
- Dedicated account management for multi-agency deployments
- Phased rollout support
- 24/7 priority support tier available
Installation — $2,500/site ($2,000 for 5+ regional)
Professional installation anywhere in the lower 48 states. Includes site survey, full hardware setup, connectivity testing, and system commissioning. For multi-site deployments of 5 or more units in the same state or region, installation is $2,000/site.
- Permanent pole mount
- Building / wall mount
- Temporary telescoping pole (seasonal or event use)
- Mobile rolling cart (portable 24/7 internet)
- Integration into existing power (grid-tie — custom quote)
Designed for Federal & State Lands: Every deployment option avoids ground disturbance — no excavation, no ground penetration — eliminating NEPA triggers for ground disturbance on federal and state park lands. Mount to an existing structure or use a freestanding tripod with zero site impact.
Monthly Service — $390/mo per unit
- Starlink connectivity (unlimited data)
- Cloud storage & 30-day video retention
- Data transmission & sensor data export
- Platform access & camera control interface
- Software updates & remote monitoring
- Email & phone technical support
- 1 annual on-site maintenance & troubleshooting visit
Built to Last, Anywhere
Mounting Options Available
Choose the perfect mounting solution for your deployment
Pole Mount
Ideal for permanent installations on utility poles, fence posts, or dedicated mounting poles. Adjustable height and 360° rotation.
Wall Mount
Perfect for buildings, structures, or shelters. Secure mounting with adjustable angles for optimal viewing position.
Temporary Tripod
Quick-deploy solution for events, research, or temporary monitoring. Portable and easy to relocate as needed.
Frequently Asked Questions
Everything you need to know
Ready to bring connectivity to your site?
Solar-powered Starlink. Turnkey installation. No grid, no permits, no ground disturbance.
Sentinel: $6,200 | Sentinel + Camera: $7,500 | Monthly: $390/mo | Installation: $2,500
Ryan Abrahamsen